United States
All 3M Products
Adhesives, Sealants & Fillers

3M Adhesives, Sealants & Fillersfor Collision Repair

Leading body shops follow OEM repair procedures.

Help protect yourself, your shop, and your customer by repairing the vehicle the right way, every time. Repair confidentially with 3M Adhesive Sealants and Seam Sealers.

Research

Search the original equipment manufacturer’s website for the most up-to-date repair procedures, process guides, bulletins and positioning statements important to the repair.

Directly access OEM procedure websites
Document the Procedure

Make sure to document the procedure at the time of repair. Include in the repair order:

- OEM repair procedures used

- Before and after photos

- Detailed scan report

Never forget these steps, hang this infographic in your shop.
Improve Accuracy

Checking OEM repair procedures before starting a repair can help you write more accurate estimates, order the correct parts, and source the proper products.
Always Validate

OEM procedures and products change frequently. Even if you have repaired a vehicle multiple times, validate OEM procedures are current.
Select the Right Products

The solutions used to complete the repair are equally important as the procedure. OEMs call out specific products for use in the repair to achieve the best results.

Explore the online catalog
Get Paid

Following OEM repair procedures can help you get paid for the work you do and the materials you use to complete the repair. Build your research and materials into the repair estimate.

If these steps aren't part of your repair process, you may want to adopt them. Ryan Marrinan, 3M Application Engineer, explores the importance of OEM Repair Procedures.

technician applying 3M adhesive sealant seam sealer

Seam sealing replication made easier

Help save time and effort with 3M OEM Match Family of seam sealer solutions

GET FACTORY-QUALITY SEAMS - EXPLORE 3M PRODUCTS

OEM Resources and an Overview of Fillers, Adhesives and Sealants for Collision Repair - Key Questions and Answers for the Body Shop

OEM Procedure Resources and Third-Party Sites

Checking OEM repair procedures before starting work can help write more accurate estimates, order the correct parts, and source the proper products. If work is being outsourced, having the procedures on hand can also help the technician give precise directions to the vendor – helping eliminate misguidance and rework.

Always access OEM procedures through the original manufacturer’s website. Here are the links for direct access:

Audi

BMW

FORD/Lincoln

General Motors

Honda/Acura

Jaguar/Land Lover

Mazda

Mercedes Benz

Nissan/Infiniti

Porche

Stellantis

Subaru

Tesla

Toyota/Lexus

Volvo

Volkswagen

Third-Party Websites

I-CAR

Provides Reparability Technical Support (RTS). This repair information highway offers OEM search tools, best practices, technical articles, and real-time answers to collision repair questions via Ask I-CAR.

OEM1Stop

Intended to provide vehicle repair technicians with easy access to the most up-to-date repair information made available by each of its participating automakers.
How do I rebuild the structure of OEM seam to make my repair invisible?

NOTE :The structures of seam seals often differ from manufacturer to manufacturer. Four of the most commonly used seams are the swirl bead, push-pull bead, textured OEM bead and flat Bead. In the end, the right choice of nozzle and pressure is key.

Steps to reproduce OEM seams:

Assess the OEM Bead: Carefully study the OEM seam or bead that you want to replicate. Take note of its size, shape, texture, and any specific patterns or contours.

Choose the Right Sealant: Select a sealant that is designed and recommended by the OEM manufacturer for replicating OEM beads or seams.

Masking: Use masking tape to create guides for where you want to apply the sealant. This will help you ensure that the bead is uniform and follows the contours of the original seam.

Apply the Sealant: Load the chosen sealant into a caulk gun or applicator. Apply the sealant along the guides you've created. Be mindful of the bead's size and shape as you apply it. Use a steady and consistent hand to maintain evenness.

Blend Seam with Surrounding Area: Feather the ends of the bead into the surrounding area for a seamless transition. This is important to make the repair less noticeable.

Curing Time: Allow the sealant to cure according to the manufacturer's instructions. It's important to let it fully set before proceeding with any further steps.

Painting: Once the sealant has cured, you can proceed with painting the repaired area to match the rest of the vehicle. Follow the standard painting and finishing procedures for automotive paint to ensure a professional finish.

Final Inspection: After painting and finishing, inspect the repair to ensure that the replicated bead matches the surrounding OEM seams in terms of appearance, texture, and contour.

Optional Clear Coat: For an extra level of protection and to achieve a factory-like finish, you can apply a clear coat over the painted area. This will help protect the repair and make it less noticeable.
Can I use your plastic repair material on all types of plastic?
The plastics most commonly used and repaired in vehicle construction are as follows:
- PP/EPDM – polyethylene ethylene-propylene-diene rubber (Thermoplastic)
- ABS – Acrylonitrile butadiene styrene (Thermoplastic)
- PUR – Polyurethan (Thermo set)
- GFK – glassfibre reinforced plastics (Plastic Composite)
3M has a variety of products for repairing plastics depending on plastic types, but also according to the repair to make:

For scratches: 3M™ EZ Sand Multi Purpose Repair Material, PN 05887 to repair all types of plastic parts (PP*, EP*, TPO*, PP/EPDM*, PC, PUR, ABS, etc.)

For holes & cracks: 3M™ Flexible Bumper Patch, PN 05888 and 3M™ EZ Sand Multi Purpose Repair Material, PN 05887

For Broken parts for example headlight tab: 3M™ Super Fast Plastic Repair Adhesive, 04247 (Clear), 04248 (Black)

* Use 3M™ Polyolefin Adhesion Promoter 05907 prior to adhesive application for polyolefins identified by the mold marks (PP, PE, TPO or EPDM, do not use it on ABS).

** 3M™ Flexible Bumper Patch, PN 05888 is used with 3M™ Adhesion Promotor 06396 and can be used on LSE plastics, as well as TPO, PPO, PP, PC, PC and ABS).
For which bonding application can I use which body repair adhesive?
Adhesive repair in automotive applications can be categorized into two main types: structural and non-structural adhesives.

Here are the key differences and their respective applications:

Non-Structural Adhesives: primarily used for bonding and repairing non-load-bearing components.

Non-structural adhesives are applied to repair various non-critical parts, including:
- Bumpers
- Trim pieces
- Interior components
- Roof skin
- Door skin
- Sill
- Quarter panels/Truck Box/Van Side
Structural Adhesives: designed to provide load-bearing capabilities and structural integrity to the repaired components. They create a strong bond that can withstand forces and stresses.

These adhesives are commonly used in repairing critical structural components, such as:
- Frame members
- Roof panels/skin
- Front Upper/Lower Rail
- Body Side
- Structural pillars (A, B, C pillars) uniside
- Sill
- Rear Unibody/Wheel Opening
The choice between structural and non-structural adhesives depends on the severity of the damage and the specific automotive component you're repairing. Structural adhesives are essential when restoring the vehicle's overall strength and safety, while non-structural adhesives are suitable for cosmetic and less critical repairs. Always follow manufacturer recommendations and guidelines when selecting and using these adhesives, as they can vary based on the make and model of the car.

Refer to our brochure for more information related to our structural adhesives.

3M Solutions for OEM Repair Procedures (PDF, 1,474 KB)
How thick can I apply body filler?

Independent studies have shown a negative impact of thicker layer of body filler material.

3M recommends for polyester-based as well as epoxy-based body fillers, to apply them in layers no thicker than 2-3mm at a time. Applying thicker layers can lead to problems with drying and curing, as well as air inclusion.

Recommendation for body filler application for car repairs:

Ensure the surface is clean and free of rust, dirt and contaminants.
Prepare the surface and products, ensure they are at recommended usage temperature.
Prepare body filler according to the manufacturer's instructions.
Use appropriate safety equipment, including gloves, eye protection and a dust mask when working with filler.

Curing of Body Fillers:

Proper curing is crucial for achieving a strong and durable repair when using body fillers. The curing process varies depending on the type of filler you're using, whether it's polyester-based or epoxy-based. Refers to 3M technical documentation to follow the right curing or forced curing process depending on the product used.

General Tips for Curing:

Ensure the repaired area is in a well-ventilated space while curing to allow any fumes or gases to dissipate.
Avoid exposing the curing filler to excessive moisture during the curing process, as this can negatively affect the quality of the repair.
Temperature and humidity can influence curing times - warmer conditions typically speeding up the process.
If you're uncertain about whether the filler has fully cured, you can perform a "thumbnail test." Gently press your thumbnail into an inconspicuous area of the filler. If it leaves an indentation, the filler may not be fully cured.

In summary, understanding and following the recommended curing procedures for the specific type of body filler you're using is essential for achieving a successful and long-lasting repair. Always consult the manufacturer's instructions and consider environmental factors to ensure proper curing.

technician grabbing a 3M seam sealer from 3M RepairStack Cabinet

Unlock more opportunities for profit at your body shop

3M™ RepairStack™ Performance Solutions is designed to help advance body shop efficiency, profitability and performance. This integrated and automated platform, shops can enjoy:

- an inventory management system ensuring materials needed for safe and reliable repair are available
- streamlined blueprinting and billing process
- real-time insights into business performance

DISCOVER YOUR SAVINGS

3M Body Repair Training | Three-Day In-Person Course

Hands-on sessions focusing on OEM repair procedures

A three-day technician training program focusing on foundational body repair process which underpin OEM repair procedures to restore a collision-damaged vehicle back to an acceptable state of crashworthiness.

Explore and Register for Body Repair Training

115 products

Your selections:

Filter

3M™ NVH Dampening Material 04274, 200 mL Cartridge 6/Case

3M Stock

7100004038

UPC

00051131042742

Alternative ID

04274

3M™ Flexiclear Body Seam Sealer, 08405, 1/10 gal cartridge, 12/Case

3M Stock

7000121530

UPC

00051135084052

Alternative ID

08405

3M™ All-Around Autobody Sealant, 08500, 1/10 gal Cartridge, 12 per case

3M Stock

7000046622

Previous 3M Stock

62553352196

UPC

00051135085004

Alternative ID

08500

3M™ OEM Seam Sealer Tip Adapter 08206, 6/Bag, 6 Bags/Case

3M Stock

7100337262

Alternative ID

08206

3M™ Flexible Foam 08463, 200 mL Cartridge 6/Case

3M Stock

7100045768

Previous 3M Stock

60980036473

UPC

00051131084636

Alternative ID

08463

3M™ Auto Glass Urethane Windshield Adhesive, 08693, 10.5 fl oz Cartridge, 12 per case

3M Stock

7000120424

Previous 3M Stock

60980015451

UPC

00051131086937

Alternative ID

08693

Bondo® Glazing and Spot Putty, 00651, 16 oz

3M Stock

7010290635

UPC

00076308006518

Alternative ID

651

Bondo® Glazing & Spot Putty, 00907, 4.5 oz, 6/Case

Bondo® Glazing and Spot Putty, 907SRP, 4.5 oz, 6 per case

3M Stock

7100158705

UPC

00076308009076

3M(TM) Flex Pack Nozzle, 08188, 6 per case

3M™ Flex Pack Nozzle 08188, 25/Carton, 6 Cartons/Case

3M Stock

7000119729

UPC

00051135081884

Alternative ID

08188

3M(TM) Disposable Paper Mixing Board, 20382

3M™ Disposable Paper Mixing Board 20382, 12/Case

3M Stock

7100144396

UPC

00051593203828

Alternative ID

B-20382

Bondo® Liquid Hardener, 00912SRP, 0.37 oz, 6 per case

3M Stock

7100158704

UPC

00076308009120

Alternative ID

00913SRP

3M™ Plastic and Emblem Adhesive, 08061, 5 oz Tube, 6 per case

3M™ Plastic Emblem and Trim Adhesive

3M Stock

7000045518

Previous 3M Stock

60455054993

UPC

00051135080610

Alternative ID

08061

3M™ Platinum™ Glaze 05862, 276 mL DMS Cartridge 6/Case

3M Stock

7000120075

UPC

00051131058620

Alternative ID

05862

A 3M™ 08609 Window-Weld Super Fast Urethane Black Cartridge - 10.5 fl oz.

3M™ Windo-Weld™ Super Fast Urethane 08609, Black, 10.5 fl oz Cartridge 12/Case

3M Stock

7000028403

Previous 3M Stock

60980036929

UPC

00051135086094

Alternative ID

08609

3M(TM) Fast n Firm(TM) Seam Sealer Beige 08505

3M™ Fast N Firm Seam Sealer, 08505, 1/10 gal Cartridge, 12/Case

3M Stock

7000045495

Previous 3M Stock

60455052021

UPC

00051135085059

Alternative ID

08505

A 3M™ OEM Match Adjustable Ripple Tip 33995

3M™ OEM Match Ripple Tip

Options available

3M™ Platinum™ Select Filler

Options available

Photo: 3M™ Automotive Adhesion Promoter 06396

3M™ Automotive Adhesion Promoter, Sponge Applicator Packet

3M Stock

B40065518

Alternative ID

06396

3M™ Urethane Seam Sealer

Options available

3M(TM) Super Fast Repair Adhesive - Black, 50 mL, 04748

3M™ Super Fast Repair Adhesive

Options available

3M™ Short Strand Fiberglass Reinforced Filler, 05816, 1 Gallon

3M™ Milled Fiberglass Body Filler 05816, 1 gal, 4/Case

3M Stock

B5005006042

UPC

00051131058163

Bondo® Long Strand Fiberglass Reinforced Filler LS-QT-ES, 32 oz (2 lb), 6 per case

3M Stock

70009157564

UPC

00076308007621

Bondo® Long Strand Fiberglass Reinforced Filler LS-QT-ES, 32 oz (2 lb), 6 per case

3M Stock

7100315245

UPC

00076308007621

3M™ OEM Match Sprayable Tip

Options available

Dynatron™ Yellow Spreader

Options available

3M™ OEM Seam Sealer Tip

Options available

3M™ Dynamic Mixing System - Cartridge Brochure DMS

3M™ Dent Finishing Glaze 05857, 276 mL DMS Cartridge 6/Case

3M Stock

B40067417

UPC

00051131058576

Bondo® Home Solutions™ Fiberglass Resin 20126

Bondo® Fiberglass Resin Liquid Hardener

3M Stock

B40067614

Hi-Tack Composite Spray 71 Green Product Image

3M™ Hi-Tack Composite Spray Adhesive 71

Options available

Bondo(R) Rotted Wood Restorer, 20131, 7 oz, 6 per case

Bondo® Rotted Wood Restorer, 20131, 8 oz, 6 per case

3M Stock

7010412222

Previous 3M Stock

60455068324

UPC

00051131334823

Alternative ID

20131

Bondo® Rotted Wood Restorer, 20131, 8 oz, 6 per case

3M Stock

60455068324

UPC

00051131334823

Alternative ID

20131

Bondo® Glass Reinforced Filler, 00272, 2.56 lb/1.1kg, 12/Case

Bondo® Bondo-Glass Reinforced Filler, 272C, 1 Quart (41 oz), 12 per case

3M Stock

7000120081

UPC

00076308002725

Alternative ID

272

3M(TM) Automix(TM) SMC/Fiberglass Panel Adhesive, 08219

3M™ SMC/Fiberglass Repair Adhesive

Options available

3M™ Primer

Options available

Dynatron™ Blue Cream Hardener

3M Stock

B40067608

3M™ Wetordry™ Rubber Squeegee, 05517, 2-3/4 in x 4 1/4 in, 50 per case

3M Stock

B40066611

UPC

50051144055178

3M™ Platinum™ Plus Glaze

Options available

3M™ General Trim Adhesive

Options available

Bondo® Glazing & Spot Putty, 00907, 4.5 oz, 6 per case

3M Stock

60455055941

UPC

00076308009076

Alternative ID

907

A Bondo® Glazing and Spot Putty, 907C, 4.5 oz (128 gm)

Bondo® Glazing and Spot Putty 907C, 4.5 oz (128 g), 6 per case

3M Stock

7000120080

UPC

00076308009076

Alternative ID

907

Bondo® Glazing and Spot Putty, 00651, 16 oz

3M Stock

60455055909

UPC

00076308006518

Alternative ID

651

Bondo(R) All-Purpose Putty, 20052, Quart, 3 per case

Bondo® All-Purpose Putty

3M Stock

B40067516

UPC

00076308200527

3M™ OEM Match Wing Nozzle Tip

Options available

3M™ OEM Match Wide Stream Tip

Options available

3M™ Quick Grip Filler 33181, 1 gal, 4/Case

3M Stock

B40067490

UPC

00051131331815

3M™ Yellow Spreader Rigid

Options available

Dynatron™ Dyna-Hair Long Strand, 472, 1 Quart (US)

Dynatron™ Dyna-Hair Long Strand, Filler 472, 1 qt, 12 per case

3M Stock

B40067501

UPC

00076308004729

3M(TM) Threaded Cartridge Nozzle, 08187, 12 per case

3M™ Threaded Cartridge Nozzle 08187, 50/Carton, 6 Cartons/Case

3M Stock

7010328467

UPC

00051135081877

Alternative ID

08187

3M™ Semi-Rigid Parts Repair

Options available

3M™ Plastic Emblem and Trim Adhesive, 03601, 1 oz, 24 per case

3M Stock

60455056212

UPC

00051131036017

Alternative ID

03601

3M™ Plastic Contour Sheet 04903, 5 in x 12 ft Roll 6/Case

3M Stock

B40068822

UPC

00051131049031

3M Adhesives, Sealants & Fillersfor Collision Repair

Leading body shops follow OEM repair procedures.

OEM Resources and an Overview of Fillers, Adhesives and Sealants for Collision Repair - Key Questions and Answers for the Body Shop

3M Body Repair Training | Three-Day In-Person Course

Hands-on sessions focusing on OEM repair procedures

115 products